Remove Frp Samsung J106b (J1 Mini Prime Android 6.0) 100% Tested Method

In this tutorial you will learn how to remove FRP (Factory Reset Protection Or Google Account Verification) on Samsung Galaxy J1 Mini Prime (Security Patch Level 2018, Running On Android Marshmallow 6.0) by using Windows PC or Laptop.
Before starting FRP removing procedure, you will need to download and install following stuff that is given below. This method is 100% working.
1- Samsung USB Drivers
2- Odin Tool (Samsung Flashing Tool)
3- J106B COMBINATION_UUB_FA60_J106BUBU0ARC1
4- J106B Stock ROM J106BUBU0ARA1

How To Remove J106B FRP By Using Odin - Complete Guide

1. Install Samsung USB drivers on your PC (Skip this step if already installed).
2. Power off your device and boot into Download Mode. Press and hold Volume Down + Home + Power button at the same time, Release all buttons when warning sign appear then press Volume Up button to continue.
3. Extract Odin software and launch it then connect your phone with PC via USB data cable, Odin will detect your device.
4. Now you need to flash Combination file first, Click on AP button and select J106B Combination file then click on Start button. When Green Pass message appear, phone will Reboot automatically.
   
5. Now Your phone is in Factory Binary Mode, Go to Settings>> Backup & reset>> Factory data reset>> RESET PHONE>> ERASE EVERYTHING.
6. After Factory Reset, Connect your phone with PC in Download Mode, Open Odin tool and write flash back to Stock ROM (Original Firmware). Select BL, AP, CP, CSC from Stock ROM folder and click on Start button.
   
7. After flashing, phone will reboot in normal mode and now you don't need any Google Account Verification. FRP is successfully removed.

Sumber https://infinityrom.blogspot.com/